PROBLEM WITH UR22 SOUND

This section is about Steinberg's UR and UR-RT USB audio interfaces product range
Post Reply
VeeKay85
New Member
Posts: 1
Joined: Sat Nov 08, 2014 9:53 pm
Contact:

PROBLEM WITH UR22 SOUND

Post by VeeKay85 »

Hello to all,

I am so sorry that my 1st post is sad... though.. everything was working fine with my UR22 till today.
The phantom power (+48V) worked properly till i pluged in an electric guitar today and when i turned phantom power on it didn't light up and the usb light was blinking and it disconnected from my computer.
Now without the phantom power on it doesn't have any output sound at all.
I am using Windows 8.1, i have checked the drivers (uninstalled and reinstalled), i checked the cable (i changed about 5 cables with no result) and for a DAW i am using ableton and all the settings are ok.... PLEASE HELP! :?

Thanks in advance!!

User avatar
BriHar
Senior Member
Posts: 2159
Joined: Wed Dec 15, 2010 11:10 pm
Contact:

Re: PROBLEM WITH UR22 SOUND

Post by BriHar »

:shock: You don't need Phantom Power for an electric guitar!!!

:o Very possibly you've burned the unit out. Normally the phantom power would not cause any problem when plugging in a normal TS guitar cable but if you happened to use a TRS or XLR cable, then you might have short circuited the Power and fried it.
"...yes I think it can be easily done, just take everything down to Highway 61."

Sun Point Studio Turbenthal, Switzerland


Cubase Pro 10.5.20 - 64bit | Cubase AI 10.5 | WaveLab 9.0.10 - 64bit | PT10 | UR28M | UR44 | CMC-PD/4xFD/QC/AI/CH/TP | BCF2000 | Contour Shuttlexpress | Graphire Tablet | Cubendo Custom Keyboard | Lenovo E31 Workstation:Xeon E3-1225V2/3.2GHz; 14GB DDR3 SDRAM; 2x Intel-Flash520 SSD 180GB (C:/D:);1TB 7200rpm Sata3 (F:); DVD RW (E:); Ext. 3TB USB3 Freecom + WD 1TB; Nvidea GeForce GT 630 4GB DDR3 Video Ram AGP PCIE | Win 10 Pro 64 Bit

Palvelin
New Member
Posts: 2
Joined: Tue Nov 11, 2014 5:13 pm
Contact:

Re: PROBLEM WITH UR22 SOUND

Post by Palvelin »

I guess I have the same problem. Is it hard to fix by myself with a little bit of experience about electronic components or do I need to send it for repairing?

mogreen
New Member
Posts: 2
Joined: Fri Dec 19, 2014 1:42 am
Contact:

Re: PROBLEM WITH UR22 SOUND

Post by mogreen »

Today the same thing happened to my UR22.
I plugged a condenser mike in and switched on the Phantom Power, which led to the UR22 disappearing from my MacBook Pro. I tried unplugging the USB and replugging it. My Mac recognizes the UR22, but there's no sound except a pulsing thumping sound and a blinking light on the unit.
Same thing no matter what (Phantom/no Phantom, mike/line plugged in, headphones, line out etc). Anybody knows what's going on with these units?

Post Reply

Return to “Steinberg UR Series”

Who is online

Users browsing this forum: No registered users and 1 guest