Synsopos.app could not be started

Discussions about our next-generation scoring application, Dorico.
Post Reply
Cor anglais 16
Junior Member
Posts: 71
Joined: Wed May 18, 2016 2:15 am
Contact:

Synsopos.app could not be started

Post by Cor anglais 16 » Thu Dec 13, 2018 3:52 am

I see many threads on the forum concerning an inability to start Dorico because of trouble with Synsopos that has yet to be fixed by the developers. I have a different problem, one that apparently is not addressed anywhere I can find it. I am trying to install Dorico on a brand new MacBook Pro, and in order to do that I first have to install the eLicenser Control Center. The install goes without a hitch, but when I boot eLicenser Control Center, I am met with the following message:
Screen Shot 2018-12-12 at 9.48.46 PM.png
(268.42 KiB) Not downloaded yet
eLicenser Control Center then crashes as soon as I try to do anything with it. Restarting or uninstalling eLCC and re-installing it have no effect. Apparently everyone else's problem with Synsopos is that their version of eLCC is newer/older or something than their version of Synsopos—but this is clearly not my problem, because the computer is brand new and everything on it was downloaded straight from the internet today. Any idea as to what's going on here, or how to fix it?

User avatar
MarkSealey
Member
Posts: 706
Joined: Sat Aug 13, 2016 9:57 pm
Location: Valencia, California
Contact:

Re: Synsopos.app could not be started

Post by MarkSealey » Thu Dec 13, 2018 4:00 am

Does this thread help, Cor anglais 16?
--
Mark Sealey
Dorico 3.0.0.1038/Ivory II/VSL/NotePerformer 3/(Sibelius Ultimate, 18.5.0…) on 'Late 2014' Retina 5K iMac; 4 GHz i7; 32 GB RAM; Mojave, 10.14.6

User avatar
k_b
Senior Member
Posts: 1328
Joined: Thu Oct 20, 2016 4:18 pm
Contact:

Re: Synsopos.app could not be started

Post by k_b » Thu Dec 13, 2018 6:44 am

Cor anglais 16,
I am not 100% sure but, start by downloading the Steinberg Installer, then choose Dorico from there and download it. The eLicenser will be automatically installed as part of the Dorico download.
Dorico Elements 3.0.10, Dorico Pro 3.0.10

semibreve [whole note] - minim [half note]
crotchet [quarter note] - quaver [eighth note]
semiquaver [sixteenth note]

User avatar
Ulf
Steinberg Employee
Posts: 1569
Joined: Wed Jul 31, 2013 9:44 am
Location: Steinberg Headquarters
Contact:

Re: Synsopos.app could not be started

Post by Ulf » Thu Dec 13, 2018 8:25 am

Open a terminal and navigate to /Library/Application Support/Synchrosoft/pos/Synsopos.app
That is the app that the eLicenser Control Center tries to launch.
Is it there and what permissions does it have, does any user have execution rights?
Can you launch the app from there?
Since it is a background app, it won't show any window or menu, but in the Activity Monitor a process with the name Synsopos shall appear.
Steinberg employee

Cor anglais 16
Junior Member
Posts: 71
Joined: Wed May 18, 2016 2:15 am
Contact:

Re: Synsopos.app could not be started

Post by Cor anglais 16 » Thu Dec 13, 2018 2:52 pm

Ulf wrote:
Thu Dec 13, 2018 8:25 am
Open a terminal and navigate to /Library/Application Support/Synchrosoft/pos/Synsopos.app
That is the app that the eLicenser Control Center tries to launch.
Is it there and what permissions does it have, does any user have execution rights?
Can you launch the app from there?
Since it is a background app, it won't show any window or menu, but in the Activity Monitor a process with the name Synsopos shall appear.
It's there: not in my user Library, but rather in the System Library. Permissions are rwxr-xr-x. I can launch it from there, and it shows up in the Activity Monitor (but it was already showing up in the Activity Monitor before, when the message would pop up).

Cor anglais 16
Junior Member
Posts: 71
Joined: Wed May 18, 2016 2:15 am
Contact:

Re: Synsopos.app could not be started

Post by Cor anglais 16 » Thu Dec 13, 2018 2:54 pm

MarkSealey wrote:
Thu Dec 13, 2018 4:00 am
Does this thread help, Cor anglais 16?
Sorry, I had seen that one already; no help there. It's one of several that claimed the versions were mismatched.

Cor anglais 16
Junior Member
Posts: 71
Joined: Wed May 18, 2016 2:15 am
Contact:

Re: Synsopos.app could not be started

Post by Cor anglais 16 » Thu Dec 13, 2018 3:04 pm

k_b wrote:
Thu Dec 13, 2018 6:44 am
Cor anglais 16,
I am not 100% sure but, start by downloading the Steinberg Installer, then choose Dorico from there and download it. The eLicenser will be automatically installed as part of the Dorico download.
Thanks, giving that a try now. So far it's downloading things, which is further than I got with trying to run eLCC...

Cor anglais 16
Junior Member
Posts: 71
Joined: Wed May 18, 2016 2:15 am
Contact:

Re: Synsopos.app could not be started

Post by Cor anglais 16 » Thu Dec 13, 2018 4:39 pm

No dice. Everything's downloaded and installed, but now I'm at the point where Dorico won't start, and eLCC won't start either because of this Synsopos thing not being able to be started (even though it's running in Activity Monitor).

User avatar
Ulf
Steinberg Employee
Posts: 1569
Joined: Wed Jul 31, 2013 9:44 am
Location: Steinberg Headquarters
Contact:

Re: Synsopos.app could not be started

Post by Ulf » Thu Dec 13, 2018 4:47 pm

Kill Synsopos in the Acitivy Monitor and then run the eLCC, does it then launch?
Steinberg employee

Cor anglais 16
Junior Member
Posts: 71
Joined: Wed May 18, 2016 2:15 am
Contact:

Re: Synsopos.app could not be started

Post by Cor anglais 16 » Thu Dec 13, 2018 4:57 pm

Ulf wrote:
Thu Dec 13, 2018 4:47 pm
Kill Synsopos in the Acitivy Monitor and then run the eLCC, does it then launch?
No. Killed Synsopos, ran eLCC, same message. Synsopos just re-appears in Activity Monitor. Clearly Synsopos is starting up, even though the message claims it's not...

User avatar
Daniel at Steinberg
Moderator
Posts: 13891
Joined: Mon Nov 12, 2012 10:35 am
Contact:

Re: Synsopos.app could not be started

Post by Daniel at Steinberg » Thu Dec 13, 2018 7:17 pm

Can you grab a screenshot of the About eLicenser Control Center window and attach that here?

Cor anglais 16
Junior Member
Posts: 71
Joined: Wed May 18, 2016 2:15 am
Contact:

Re: Synsopos.app could not be started

Post by Cor anglais 16 » Thu Dec 13, 2018 7:37 pm

Sure, try this:
Screen Shot 2018-12-13 at 1.36.53 PM.png
(422.87 KiB) Not downloaded yet

Cor anglais 16
Junior Member
Posts: 71
Joined: Wed May 18, 2016 2:15 am
Contact:

Re: Synsopos.app could not be started

Post by Cor anglais 16 » Thu Dec 13, 2018 10:13 pm

Update: I tried from a new administrator account and was able to start up Dorico, and tried to put in my activation license but it was denied because it's a Dorico 1 trial license and I need a Dorico 2 trial license (long story)—but that's a different topic that I'll investigate myself. Looks like I'll have to migrate everything from one account to the other, and ideally rename it. Does anyone know if Dorico/eLCC will flip out if I rename the home folder?

Thijs Boehme
Junior Member
Posts: 138
Joined: Sat Oct 29, 2016 4:24 pm
Location: Leuven, Belgium
Contact:

Re: Synsopos.app could not be started

Post by Thijs Boehme » Fri Dec 14, 2018 12:20 pm

Off-topic, but be careful renaming your home folder, you could get locked out.
Make sure to follow the steps listed here: https://support.apple.com/en-us/HT201548
Dorico 3.0.10
MacBook Pro (2018)
macOS Catalina

User avatar
Daniel at Steinberg
Moderator
Posts: 13891
Joined: Mon Nov 12, 2012 10:35 am
Contact:

Re: Synsopos.app could not be started

Post by Daniel at Steinberg » Fri Dec 14, 2018 5:58 pm

I don't know whether or not your Soft-eLicenser will go bananas if you rename your home folder. The Soft-eLicenser file itself lives in the system-level Library folder rather than the user-level one, so I hope it would be OK, but I'm afraid I don't know.

Before you do anything drastic, make sure you have registered your current Soft-eLicenser and all of the licenses it currently has on it at MySteinberg, so that you can use the big red 'Reactivate' button there to get new activation codes if all else fails.

Cor anglais 16
Junior Member
Posts: 71
Joined: Wed May 18, 2016 2:15 am
Contact:

Re: Synsopos.app could not be started

Post by Cor anglais 16 » Sat Dec 15, 2018 4:03 pm

Daniel at Steinberg wrote:
Fri Dec 14, 2018 5:58 pm
I don't know whether or not your Soft-eLicenser will go bananas if you rename your home folder. The Soft-eLicenser file itself lives in the system-level Library folder rather than the user-level one, so I hope it would be OK, but I'm afraid I don't know.

Before you do anything drastic, make sure you have registered your current Soft-eLicenser and all of the licenses it currently has on it at MySteinberg, so that you can use the big red 'Reactivate' button there to get new activation codes if all else fails.
Thanks for the warning, Daniel. I took the appropriate precautions, and then the plunge, following the steps Thijs Boheme provided above. For future reference, this is what happened:

- Dropbox wouldn't start because of a permissions error wrt ~/.dropbox. I used sudo rm -Rd ~/.dropbox to remove that directory and all was well.

- Dorico hung on start. I solved this by starting eLicenser Control Center prior to starting Dorico (and ran the maintenance tasks for good measure), as referenced in other threads. Then Dorico started just fine. Since then I have not had to have eLCC open in order to run Dorico.

Everything else was nondescript. All appears to be well at this point. Thanks, all, for your assistance!

Cor anglais 16
Junior Member
Posts: 71
Joined: Wed May 18, 2016 2:15 am
Contact:

Re: Synsopos.app could not be started

Post by Cor anglais 16 » Wed Dec 19, 2018 7:35 pm

Quick update: every time I reboot the computer, it looks like I have to have eLCC open just the first time I boot Dorico. Life could be worse...

pianoleo
Grand Senior Member
Posts: 5768
Joined: Wed Oct 19, 2016 11:17 am
Location: London, UK
Contact:

Re: Synsopos.app could not be started

Post by pianoleo » Wed Dec 19, 2018 7:55 pm

You could add it to your startup list ;)
Pianist/accompanist/engraver/arranger
2015 Macbook Pro 13" Retina 3.1ghz dual-core i7, 8gb RAM; running Sibelius Ultimate, Logic Pro X, Dorico 3 etc.
& 2017 HP ZBook Studio G3 15.6” UHD quad-i7, 16gb RAM, Windows 10 Pro
Sibelius user since Sibelius 7 (Acorn, 1997), Ex-Sibelius user since Dorico 1.0

User avatar
Daniel at Steinberg
Moderator
Posts: 13891
Joined: Mon Nov 12, 2012 10:35 am
Contact:

Re: Synsopos.app could not be started

Post by Daniel at Steinberg » Wed Dec 19, 2018 11:32 pm

Cor anglais 16, it would be helpful if you could email me an Apple System Report. Choose About this Mac from the Apple menu, then click System Report, then choose File > Save, and attach the resulting .spx file to an email to d dot spreadbury at steinberg dot de.

Post Reply

Return to “Dorico”

Who is online

Users browsing this forum: Google [Bot], james2804, Richard Lanyon, StefanF at Steinberg and 17 guests