Cubase 9.0.20 Crash

Use this forum for an overview of issues and to report new ones.
Post Reply
User avatar
Alazarin
New Member
Posts: 24
Joined: Tue Nov 15, 2011 4:40 pm
Contact:

Cubase 9.0.20 Crash

Post by Alazarin » Fri Apr 28, 2017 8:34 pm

I updated Cubase to the latest version this afternoon hoping for a smooth transition. At first things seemed OK then suddenly my computer screen went black and it rebooted in the middle my work flow. After my computer rebooted I fired up Cubase and continued my work. Ten minutes later the screen went black and the computer refused to reboot.

I put it up on the bench, swapped out the power supply and graphics card to no avail. Eventually I was able to get my computer to reboot using the same hardware configuration it had before I installed Cubase 9.0.20. I restarted Cubase to continue my work and five minutes later it went black and rebooted a third time.

Out of desperation I uninstalled Cubase, reinstalled it only applying the 9.0.10 update and everything seems fine again. All the plugins I use are fairly recent 64-bit Native Instruments or Steinberg FX & VSTis. I do use SpinAudio Roomverb which is 32-bit plugin connected via J Bridge. I'm not sure if this caused the crash in 9.0.20 but it's never been an issue in 9.0 or 9.0.10

I will try Cubase 9.0.20 again without any J Bridged plugins and see if that makes any difference. That test will have to wait a few weeks as I'm in the middle of a project and don't have time to spare for harware or software testing.

avliav
New Member
Posts: 13
Joined: Tue Dec 16, 2014 12:25 am
Location: Los Angeles
Contact:

Re: Cubase 9.0.20 Crash

Post by avliav » Fri May 05, 2017 9:12 am

Same issue here, Cubase 9.0.20 will just just crash.
I un-installed and went back to 9.0.10 and tried the same project on Cubase 8 with no problems at all and way more stability.
No doubt that there's a problem with Cubase 9.0.20 stability now :\

Unidoubt
New Member
Posts: 8
Joined: Tue Jun 30, 2015 3:03 pm
Contact:

Re: Cubase 9.0.20 Crash

Post by Unidoubt » Fri May 05, 2017 6:36 pm

Hi all, 9.0.20 also crashed here.
Installed few days ago, and crashed few times.
1st & 2nd on Cubase shutdown, 3rd during audio export, and 4th causing hang&crash while recording. [It froze with that loud beep]
Rolled back the update to 9.0.10 last night. [via Windows control panel,Win7-64bit]
I've had no issues afterwards working the entire night.
I'll await the next update. Cheers
Cubase 10.0.20 build 187 (64bit) | OS: Win 7 64-bit | HDD: Corsair+Crucial SSD | CPU: Intel Core i7 2600K OC @ 4.6 Ghz | MEM: 16 GB G.Skill Ripjaws @ 2133 Mhz CL9 | Izotope Suite, Tokyo Dawn, Plugin Alliance, Bozlabs, Acustica, Voxengo, Melda Audio.

nuvolino
New Member
Posts: 6
Joined: Sun May 01, 2011 12:36 pm
Location: Australia
Contact:

Re: Cubase 9.0.20 Crash

Post by nuvolino » Fri May 12, 2017 7:28 am

yup happened to me too
RiMac 4GHz 6700k (skylake) i7, 32GB Ram (1867Mhz), R9 M395X, OSX 10.12.4, RME Fireface 400 running Cubase Pro 9.0.20, Reason

MacPro 3.2Ghz Dual QuadCore, 18Gb Ram, HD5870, 8800GT, OSX 10.6.8, RME Fireface 400
Cubase 5.5.3, Reason,

Trance / Electronica / Ambient - Electronic Musician

audiofrq
New Member
Posts: 35
Joined: Tue Apr 24, 2012 3:22 pm
Contact:

Re: Cubase 9.0.20 Crash

Post by audiofrq » Mon May 22, 2017 9:12 pm

On OSX 10.10 here. 9.0.10 works fine. 9.0.20 doesn't make it past the VST plugin scan and constantly crashes on load up.

Rolled back to 9.0.10 via time machine and it all worked again.

fgimian
Junior Member
Posts: 166
Joined: Thu Jan 06, 2011 12:10 pm
Contact:

Re: Cubase 9.0.20 Crash

Post by fgimian » Sat May 27, 2017 12:03 pm

I had a rock solid system on 9.0.10, I even removed any plugins which I had confirmed crashing with. But now that I've upgraded to 9.0.20, I'm also seeing random crashes that point to Cubase as the culprit in the crash log.

I'm on El Capitan.

I'll be rolling back shortly too but honestly this does worry me. 9.0.10 was so solid and it's such a shame that we went backwards :(
Software & Audio Interface: Cubase 9.5.30 x64 / Windows 10 / Focusrite Clarett 2Pre
Computer: Intel Core i7 7700K, NVIDIA GTX 1050, 64 GB RAM, 1 TB SSD + Samsung T3 2 TB USB 3 SSD

Unidoubt
New Member
Posts: 8
Joined: Tue Jun 30, 2015 3:03 pm
Contact:

Re: Cubase 9.0.20 Crash

Post by Unidoubt » Tue Jun 13, 2017 4:35 pm

Hi guys
It's been well over a month, thought there would be a new stable update provided by now.
That's too bad.

There seems quite a few people going nuts [reinstalling their system OS, cubase, plugins etc.]
without knowing its the 9.0.20 update that's unstable.
I guess the news didn't spread to notify other users.

To those who are reading now & been going nuts too after the update,
if your system was good & stable with 9.0.10, just calm down and roll your system back to that version.
Cubase 10.0.20 build 187 (64bit) | OS: Win 7 64-bit | HDD: Corsair+Crucial SSD | CPU: Intel Core i7 2600K OC @ 4.6 Ghz | MEM: 16 GB G.Skill Ripjaws @ 2133 Mhz CL9 | Izotope Suite, Tokyo Dawn, Plugin Alliance, Bozlabs, Acustica, Voxengo, Melda Audio.

composer77
New Member
Posts: 9
Joined: Tue Aug 12, 2014 8:34 am
Contact:

Re: Cubase 9.0.20 Crash

Post by composer77 » Mon Jun 26, 2017 10:10 am

a lot of crash here... waves plugins...jbridge with Nexus... maybe problem within Windows 10?

Rob Elliott
Junior Member
Posts: 145
Joined: Tue Jan 04, 2011 5:05 pm
Contact:

Re: Cubase 9.0.20 Crash

Post by Rob Elliott » Fri Jun 30, 2017 3:55 pm

I installed C9 and THEN the 9.02 update. Can I 'roll back' to 9.01 somehow??? Mine crashes on closing of any project. Or I can just continue working in 8.5 (best version of Cubase yet IMHO). I like the undo feature which is why I updated but geez, this 'crashing' issue seems widespread.
"What would you attempt to do if you knew you could not fail?"


W10 - 128 gb ram / i9

User avatar
AP
Member
Posts: 683
Joined: Thu Dec 06, 2012 11:46 pm
Contact:

Re: Cubase 9.0.20 Crash

Post by AP » Wed Jul 05, 2017 3:02 am

Cubase has been crashing while opened on my system also looks like this update has issues...
Cubase Pro 10.0.60. 15" MacBook Pro i7, SSD, 16 GB Ram, OS 10.14 UR28M, CMC.

Rob Elliott
Junior Member
Posts: 145
Joined: Tue Jan 04, 2011 5:05 pm
Contact:

Re: Cubase 9.0.20 Crash

Post by Rob Elliott » Thu Jul 06, 2017 1:50 am

Yea and the disappointing thing is I am not even motivated to send a ticket in as it will take their snail mail a week and half to tell me to 'trash the prefs'. :( Oh well - at least 8.5 is solid on my W7 64 bit system. I also own Nuendo 5 that works well.
"What would you attempt to do if you knew you could not fail?"


W10 - 128 gb ram / i9

michael cleary
New Member
Posts: 49
Joined: Mon Jun 13, 2016 1:10 am
Contact:

Re: Cubase 9.0.20 Crash

Post by michael cleary » Tue Aug 29, 2017 5:59 pm

Crashing here once in a while, randomly so can not pinpoint what causes it. Updated to 9.0.3 and still crashes when opening a project with 100+ tracks. I can open any other song and then it will let me open the big project but it won't let me open it first....

Lasso
Member
Posts: 516
Joined: Thu Dec 16, 2010 12:10 am
Contact:

Re: Cubase 9.0.20 Crash

Post by Lasso » Mon Oct 02, 2017 9:19 pm

same here over and over again..opening another project first can sometimes lead to the "faulty" project opening.
2015 MBP Retina @ 2,8 gHz, High Sierra, Cubase Pro 10, WaveLab Pro 9, UAD Apollo Twin, UAD Apollo Satellite Quad TB

vk6tnc
New Member
Posts: 1
Joined: Fri Oct 06, 2017 7:03 pm
Contact:

Re: Cubase 9.0.20 Crash

Post by vk6tnc » Fri Oct 06, 2017 7:26 pm

Mine crashes on startup with the following dialog box text: An unhandled win32 exception occurred in Cubase LE AI Elements 9.exe [14104]

Any ideas? HP Desktop and win 10 creators version 1703

User avatar
JFR
Junior Member
Posts: 89
Joined: Fri Apr 21, 2017 3:36 am
Contact:

Re: Cubase 9.0.20 Crash

Post by JFR » Wed Nov 15, 2017 10:28 pm

Rob Elliott wrote:
Fri Jun 30, 2017 3:55 pm
I installed C9 and THEN the 9.02 update. Can I 'roll back' to 9.01 somehow??? Mine crashes on closing of any project. Or I can just continue working in 8.5 (best version of Cubase yet IMHO). I like the undo feature which is why I updated but geez, this 'crashing' issue seems widespread.
Hi
Did you ever figure out what was causing Cubase to crash everytime you closed a project?
I'm on 9.0.3 and everything was fine all of a sudden it started this week it crashes everytime
i close a session ?

Thanks
JFR
Cubase Pro 10.0.50 , Cubase Pro 9.5.50 , MCDSP all bundle V6 , Intel Core I5 3570 S1155 IVY Bridge , ASUS P8Z77-V PRO , Corsair VENG 8 GB ram ,ASUS RADEON HD5450 silent 1GB
Focusrite USB Scarlett 6i6 ,Event TR6 monitors , Windows 7 Pro 64 bit

Post Reply

Return to “Issues”

Who is online

Users browsing this forum: No registered users and 4 guests