USB type C

This section is about Steinberg's UR-C audio interfaces product range
Post Reply
RPowell
New Member
Posts: 3
Joined: Thu Dec 12, 2019 6:11 pm
Contact:

USB type C

Post by RPowell » Thu Dec 12, 2019 6:19 pm

I have an HP Pavillion with the small oval shaped type c connector on the face of the computer. The UR44C cable has the type c connector and a type A on the other end........do I need the the C (small oval connector) on both ends for the unit to work properly?

BrianL
New Member
Posts: 8
Joined: Wed Nov 28, 2018 8:01 am
Contact:

Re: USB type C

Post by BrianL » Mon Dec 23, 2019 7:55 pm

RPowell wrote:
Thu Dec 12, 2019 6:19 pm
I have an HP Pavillion with the small oval shaped type c connector on the face of the computer. The UR44C cable has the type c connector and a type A on the other end........do I need the the C (small oval connector) on both ends for the unit to work properly?
I also have the same question. Some help is appreciated.


Thanks in advance,
Regards,
Brian




_____________________________________________________________________________________
usps tracking

Veance
New Member
Posts: 2
Joined: Sat Dec 28, 2019 4:17 pm
Contact:

Re: USB type C

Post by Veance » Mon Dec 30, 2019 11:20 am

Not Needed. Mine works...sort of.

Veance
New Member
Posts: 2
Joined: Sat Dec 28, 2019 4:17 pm
Contact:

Re: USB type C

Post by Veance » Mon Dec 30, 2019 11:28 am

Never mind my previcious answer.
Apparently you do, if you need it to work without the ac-adaptor, otherwise no you can use it with a USB type A end.

viewtopic.php?f=295&t=175298

RPowell
New Member
Posts: 3
Joined: Thu Dec 12, 2019 6:11 pm
Contact:

Re: USB type C

Post by RPowell » Mon Dec 30, 2019 9:42 pm

It will function properly through the TYPE A.......the small Type C connector is only used specifically to power the UR 22/or 44 instead of using the plug in power supply.

steinforumDFG
New Member
Posts: 3
Joined: Sat Feb 15, 2020 4:38 pm
Contact:

Re: USB type C

Post by steinforumDFG » Sat Feb 15, 2020 4:55 pm

Hello Friends, I have a simple question I can´t find the answer :
Does UR44C only works in USB2 and USB 3.1 options, but NOT in 3.0 ???
Because connected into an USB 3.0 port, only works set in High-Speed (USB 2.0) driver option...
Thanks.

ca-booter
Junior Member
Posts: 172
Joined: Mon Mar 21, 2016 8:38 pm
Location: Netherlands
Contact:

Re: USB type C

Post by ca-booter » Mon Feb 17, 2020 10:32 am

My UR816C works just fine in my old PC's USB 3.0 port with 3.1 superspeed modus.
Remember: USB 3.1 Gen1 = USB 3.0

Hope this helps
PC ASUS i7-2600 3,4Ghz |W10-Pro 1909 SSD | 16Gb DDR3 | ASUS R5230 graphics | Cubase Pro 10.5.12 | Wavelab 10 EL | Absolute 3 |SuperiorDrummer 3 | Yamaha-Steinberg N12 FW | Steinberg UR816C + Behringer ADA8200 | Behringer X-Touch One | Fishman TriplePlay | Lexicon MX200, Strymon Volante, Art Pro VLA II, Art Pro Channel II, Klark Teknik: KT-2A, 1176-KT, 2*EQP-KT

steinforumDFG
New Member
Posts: 3
Joined: Sat Feb 15, 2020 4:38 pm
Contact:

Re: USB type C

Post by steinforumDFG » Wed Feb 26, 2020 1:34 pm

Thanks ca-booter

Mmmm... Now I must ask myself "Why I have that problem?" My UR44C in particular? Mi PC motherboard? Win 10?
They say if you have problems with 3.1 switch to USB 2.0 modus option, OK, but if one day I want to sell it... how I explain that it s not so important...
Now I have another problem : With Sony or Magix Sound Forge sometimes it works an sometimes not...
For that last reason I have had to connect my Focusrite Saffire PRO 24 again, to use ir only for Sound Forge. (it worked fine ever with all programs)

If I solve it, I will tell you, Thanks again.

ca-booter
Junior Member
Posts: 172
Joined: Mon Mar 21, 2016 8:38 pm
Location: Netherlands
Contact:

Re: USB type C

Post by ca-booter » Wed Feb 26, 2020 3:51 pm

steinforumDFG wrote:
Wed Feb 26, 2020 1:34 pm
Thanks ca-booter

Mmmm... Now I must ask myself "Why I have that problem?" My UR44C in particular? Mi PC motherboard? Win 10?
They say if you have problems with 3.1 switch to USB 2.0 modus option, OK, but if one day I want to sell it... how I explain that it s not so important...
Now I have another problem : With Sony or Magix Sound Forge sometimes it works an sometimes not...
For that last reason I have had to connect my Focusrite Saffire PRO 24 again, to use ir only for Sound Forge. (it worked fine ever with all programs)

If I solve it, I will tell you, Thanks again.
Maybe you can test the 44 on a different PC somewhere?
USB 3.0 bus driver uptodate?
PC ASUS i7-2600 3,4Ghz |W10-Pro 1909 SSD | 16Gb DDR3 | ASUS R5230 graphics | Cubase Pro 10.5.12 | Wavelab 10 EL | Absolute 3 |SuperiorDrummer 3 | Yamaha-Steinberg N12 FW | Steinberg UR816C + Behringer ADA8200 | Behringer X-Touch One | Fishman TriplePlay | Lexicon MX200, Strymon Volante, Art Pro VLA II, Art Pro Channel II, Klark Teknik: KT-2A, 1176-KT, 2*EQP-KT

steinforumDFG
New Member
Posts: 3
Joined: Sat Feb 15, 2020 4:38 pm
Contact:

Re: USB type C

Post by steinforumDFG » Thu Feb 27, 2020 12:37 am

Hello ca-booter, thanks !

Yes it would be nice to test it in another PC to be sure UR44C its ok... I will assemble another PC that has USB 3.0 to get me in doubt about the UR.

About 3.0 bus driver I try to update it but Win10 tell me it s the most current available.
I would like to install another USB 3.0 bus driver to see what happens...

One good thing today, I uninstalled Yamaha Driver for UR44C and installed it again, and Magic Sound Forge works apparently fine (never failed again).
Thanks for you kind support.

...........................................................................................................................................................................
PC Gigabyte 970A-UD3P / AMD FX 8350 Eight Core Processor 4.00 Ghz |W10-Pro(latest update) on HD | 12Gb DDR3 | GForce 9500 GT graphics | Cubase Pro 10.050 (latest update)

ca-booter
Junior Member
Posts: 172
Joined: Mon Mar 21, 2016 8:38 pm
Location: Netherlands
Contact:

Re: USB type C

Post by ca-booter » Fri Feb 28, 2020 1:33 pm

steinforumDFG wrote:
Thu Feb 27, 2020 12:37 am
Hello ca-booter, thanks !

Yes it would be nice to test it in another PC to be sure UR44C its ok... I will assemble another PC that has USB 3.0 to get me in doubt about the UR.

About 3.0 bus driver I try to update it but Win10 tell me it s the most current available.
I would like to install another USB 3.0 bus driver to see what happens...

One good thing today, I uninstalled Yamaha Driver for UR44C and installed it again, and Magic Sound Forge works apparently fine (never failed again).
Thanks for you kind support.

...........................................................................................................................................................................
PC Gigabyte 970A-UD3P / AMD FX 8350 Eight Core Processor 4.00 Ghz |W10-Pro(latest update) on HD | 12Gb DDR3 | GForce 9500 GT graphics | Cubase Pro 10.050 (latest update)
there is a new software package for URC since yesterday, one of the resolved issues was something with Magix
PC ASUS i7-2600 3,4Ghz |W10-Pro 1909 SSD | 16Gb DDR3 | ASUS R5230 graphics | Cubase Pro 10.5.12 | Wavelab 10 EL | Absolute 3 |SuperiorDrummer 3 | Yamaha-Steinberg N12 FW | Steinberg UR816C + Behringer ADA8200 | Behringer X-Touch One | Fishman TriplePlay | Lexicon MX200, Strymon Volante, Art Pro VLA II, Art Pro Channel II, Klark Teknik: KT-2A, 1176-KT, 2*EQP-KT

Post Reply

Return to “Steinberg UR-C Series”

Who is online

Users browsing this forum: No registered users and 1 guest